Primary parameter:
1. output range from 5400 kW to 50000 kW
2. voltage range from 3000V to 15000V
3. frequency of 50HZ and 60HZ
Fuels: natural gas, LNG, LPG, coke oven gas, CBM, hydrogen, etc.
Advantages:
1. low life-cycle cost, high ROI (Return on Investment), and super high performance and cost rate determine the sustainable profitability of enterprises.
2. the whole 5.4-50 MW series can fully satisfy the CCHP systems’ demand for efficiency, reliability, flexibility, and environmental coordination.
AGG GAS TURBINE GENSETS PARAMETERS（SIEMENS SERIES） | ||||
No. | Gas turbine type | Gas turbine output（kw) | Thermal Consumption(kJ/kw-hr) | Genset Efficiency（%） |
1 | SGT-100 | 5400 | 11613 | 31 |
2 | SGT-200 | 6750 | 11418 | 31.5 |
3 | SGT-300 | 7900 | 11773 | 30.6 |
4 | SGT-400 | 12900 | 10355 | 34.8 |
5 | SGT-500 | 19100 | 10664 | 33.8 |
6 | SGT-600 | 24770 | 10533 | 34.2 |
7 | SGT-700 | 31210 | 9882 | 36.4 |
8 | SGT-750 | 35930 | 9296 | 38.7 |
9 | SGT-800 | 47000 | 9597 | 37.5 |
Remarks:
1. All the parameters are tested in air pressure: 101.3KPa, relative humidity: 60%，50Hz, pf: 0.9；fuel: 100%CH4.
2. Completed with third generation DLE combustion system.
3. Fuels applicable: natural gas, LNG, LPG, coke oven gas, CBM, hydrogen, etc
4. This sheet is only for technical selection purpose only. AGG reserves the right to change specifications without notice.
Related products
 |  |  |  |
AGL Series | AGM Series | AGW Series | AGJ Series |